Description
High Swivel Seat with lockable flap for Passenger Seat or Driver seat Volkswagen T5/T6/T6.1
The original driver’s seat can be turned backwards with our swivel console when the driver’s door is closed. The height of the seat position does not change as a result of this conversion. In addition, this swivel console has an easily accessible lockable flap on the back with a width of 300mm x a height of 125mm.
The swivel console cannot be used with an electrically height-adjustable seat, suspension seat or bench seat.
Equipment:
The seat automatically locks into the driving position when turned. There is an opening with a diameter of 42mm in the swivel axis for the passage of electrical cables for seat heating, etc. The console is made of steel and coated in black.
Approval:
This seat swivel console was tested in 2015 by TÜV-Süd according to class M1/N1 and has a general operating permit (ABE) from the Federal Motor Transport Authority (KBA) for the VW T5 and T6 built from 2003.
The seat can only be turned when the vehicle is stationary .
Installation instructions:
► The necessary screws are included.
► This high swivel bracket replaces the original seat box. ► The handbrake lever must be remounted on the high swivel bracket using the handbrake part accessory VW T5 and T6, ► The parking brake must then be adjusted. ► A battery cannot be installed inside this swivel bracket . ► Other fittings in the seat box and the seat box panels must be adjusted.
| Article type: | Rotating console |
| Vehicle manufacturer: | Volkswagen |
| Vehicle type: | T5, T6 |
| Vehicle side: | Passenger side, driver side |
| Direction of rotation: | Left Right |
Dimensions: width 449mm x length 435mm Weight 21kg
COMPATIBILITY
– T5 (2004-2015)
– T6 (2016-2020)
– T6.1 (2021+ )
Please Note: Can only be used on vehicles with a walkthrough these can not be used with a fixed twin seat / Double Seat in front
Key steps to rotate backwards are
– Slide Seat forward
– raise seat height (to prevent plastic seat skirt catching)
– angle backrest forward
– raise lever under front of seat and swivel clockwise from North to South (through East – for passenger side or West – for driver side assume the front of the vehicle is ‘North’)
Once swivelled slide seat further back (towards front) to maximise cabin space.
Reverse this procedure to re-orient the swivel to the forward facing position for travel.
Always have the seat in the forward facing position for travel.
– Note – the Driver’s Side Swivel operates the same way however requires the steering wheel to be telescopically placed to the most forward position
The swivel is engineered and made in Germany and is able to be certified by your engineer (or ours) for fitting to your passenger (or Driver’s) side front seat.
The kit includes the swivel and the 4 high-tensile bolts for affixing the seat to the swivel. The Swivel affixes to the seat base using the original factory OEM bolts that fix the seat to the base.
——— CERTIFICATION ———
COMPLIANCE NOTE: These German designed & manufactured seat swivels are designed to conform to the internationally accepted European regulations. If you modify a seat anchorage in a vehicle most state and territory regulations will require an Engineering Compliance Certificate to be issued. To do this the engineer will wish to inspect the hardware itself (ie, the swivel) and the installation of the swivel.
The Swivel is TüV approved in Germany and is regularly accepted by authorised automotive engineers in various states and territories of Australia. The engineer will generally have the LK2 certification authority for seat anchorage changes.
Should you wish to have us arrange certification we can do this in
NSW: Vehicle Safety Compliance Certification Scheme (VSCCS) – at our facility in Campbelltown
VIC: VicRoads VASS Engineer Certificate – in South West Melbourne & Geelong
QLD: Queensland TMR Light Vehicle Modification Engineering Compliance / Mod Plate (Blue) – in Eagle Farm
NOTE: The certificate cost is unchanged for one or two swivels. i.e. You will double your engineering costs if you add one passenger swivel and have it complied, then add the driver’s swivel later. If you add both at once, then the one certificate will cover both.
ORDER COMPLIANCE CERTIFICATE
https://kombilife.com.au/products/nsw-vic-qld-engineering-compliance-certificate-seat-swivels-lk2
————————-
NOTE: YOU ARE REQUIRED TO BRING WITH YOU THE VEHICLES REGISTRATION PAPERS IF KOMBILIFE ARE INSTALLING THE SWIVELS SEATS.
Explore more from our collection.
Reviews
There are no reviews yet.