Description
The original passenger seat can be turned backwards with our swivel bracket. Installation takes place between the seat box and the seat rails. This makes the seat position 26mm higher. The swivel bracket cannot be used with a suspension seat and bench seat.
Compatible with the VOLKSWAGEN SWIVEL SEAT FOR DRIVER SEAT CRAFTER and HANDBRAKE LOWERING KIT – VW CRAFTER
Approval:
This seat swivel bracket was tested in 2021 by TÜV-Süd according to class M1/N1 and has a general operating permit (ABE) from the Federal Motor Transport Authority (KBA) for the VW Crafter 2 from model year 2018. Turning the seat is only permitted when the vehicle is stationary.
Equipment: The seat automatically locks into the driving position when turned. There is an opening with a diameter of 42mm in the rotation axis for the passage of electrical cables for seat heating etc. The console is made of steel and coated black.
Installation instructions: ► Required screws are included. ► This swivel bracket dips up to 13mm deep into the seat box from above. ► Installations in the seat box or the seat box paneling may need to be adjusted.
| Article type: | Rotating console |
| Vehicle manufacturer: | Volkswagen |
| Vehicle type: | Crafter 2, |
| Vehicle side: | Passenger side |
| Direction of rotation: | Right |
NOTE: – Engineer certificate should be sought for the installation of any device that alters seat anchorages – check with your State or Territory registration authority
——— CERTIFICATION ———
COMPLIANCE NOTE: These German designed & manufactured seat swivels are designed to conform to the internationally accepted European regulations. If you modify a seat anchorage in a vehicle most state and territory regulations will require an Engineering Compliance Certificate to be issued. To do this the engineer will wish to inspect the hardware itself (ie, the swivel) and the installation of the swivel.
The Swivel is TüV approved in Germany and is regularly accepted by authorised automotive engineers in various states and territories of Australia. The engineer will generally have the LK2 certification authority for seat anchorage changes.
Should you wish to have us arrange certification we can do this in
NSW: Vehicle Safety Compliance Certification Scheme (VSCCS) – at our facility in Campbelltown
VIC: VicRoads VASS Engineer Certificate – in South West Melbourne & Geelong
QLD: Queensland TMR Light Vehicle Modification Engineering Compliance / Mod Plate (Blue) – in Eagle Farm
NOTE: The certificate cost is unchanged for one or two swivels. i.e. You will double your engineering costs if you add one passenger swivel and have it complied, then add the driver’s swivel later. If you add both at once, then the one certificate will cover both.
ORDER COMPLIANCE CERTIFICATE
https://kombilife.com.au/products/nsw-vic-qld-engineering-compliance-certificate-seat-swivels-lk2
NOTE: YOU ARE REQUIRED TO BRING WITH YOU THE VEHICLES REGISTRATION PAPERS IF KOMBILIFE ARE INSTALLING THE SWIVELS SEATS.
Explore more from our collection.
Reviews
There are no reviews yet.