Description
Volkswagen Swivel Seat Base for Passenger or Driver Seat ID BUZZ or ID BUZZ CARGO
- Allows the seat to swivel or turn to face the back
- Great for camping as provides seating in the vehicle
- Makes the seat position 25mm higher
- Seat locks automatically when in driving position
- Approvals are needed
The original driver’s or passenger seat can be rotated backwards with our swivel bracket when the door is closed. It is installed between the seat box and the seat rails. This makes the seat position 25mm higher.
The swivel bracket cannot be used with a suspension seat and bench seat.
Equipment:
The seat automatically locks into the driving position when rotated. There is an opening with a 42mm diameter in the pivot axis for the passage of electrical cables for seat heating, etc. The bracket is made of steel and coated black.
Approval:
This seat swivel console was tested by TÜV-Süd in 2024 according to class M1/N1 and has a general operating permit (ABE) from the Federal Motor Transport Authority (KBA) for the VW ID Buzz built in 2022. Turning the seat is only permitted when the vehicle is stationary.
Installation instructions:
► The necessary screws are included. ► This swivel bracket sinks up to 14mm deep into the seat box from above . ► The assembly aids on the seat must be removed.
| Article type: | swivel console |
| Vehicle manufacturer: | Volkswagen |
| Vehicle type: | ID Buzz |
| vehicle side: | passenger side, driver side |
| Direction of rotation: | Left or Right |
Dimensions:
width 474mm x length 600mm
Weight 17kg
COMPATIBILITY
- ID BUZZ
- ID BUZZ CARGO
Please Note: Can only be used on vehicles with a walkthrough these can not be used with a fixed twin seat / Double Seat in front
——— CERTIFICATION ———
COMPLIANCE NOTE: These German designed & manufactured seat swivels are designed to conform to the internationally accepted European regulations. If you modify a seat anchorage in a vehicle most state and territory regulations will require an Engineering Compliance Certificate to be issued. To do this the engineer will wish to inspect the hardware itself (ie, the swivel) and the installation of the swivel.
The Swivel is TüV approved in Germany and is regularly accepted by authorised automotive engineers in various states and territories of Australia. The engineer will generally have the LK2 certification authority for seat anchorage changes.
Should you wish to have us arrange certification we can do this in
NSW: Vehicle Safety Compliance Certification Scheme (VSCCS) – at our facility in Campbelltown
VIC: VicRoads VASS Engineer Certificate – in South West Melbourne & Geelong
QLD: Queensland TMR Light Vehicle Modification Engineering Compliance / Mod Plate (Blue) – in Eagle Farm
NOTE: The certificate cost is unchanged for one or two swivels. i.e. You will double your engineering costs if you add one passenger swivel and have it complied, then add the driver’s swivel later. If you add both at once, then the one certificate will cover both.
ORDER COMPLIANCE CERTIFICATE
————————-
NOTE: YOU ARE REQUIRED TO BRING WITH YOU THE VEHICLES REGISTRATION PAPERS IF KOMBILIFE ARE INSTALLING THE SWIVELS SEATS.
Explore more from our collection.
Reviews
There are no reviews yet.